4
Channel 1 - Segment 1 – To set color (among 7 colors) for Segment
1
0-9
Off
10-45
Red
46-80
Green
81-115
Blue
116-150
Yellow (Red + Green)
151-185 Cyan (Green + Blue)
186-220 Purple (Red + Blue)
221-255 White (Red + Green + Blue)
Channel 2 - Segment 2 - To set color (among 7 colors) for Segment 2
Ditto
Channel 3 - Segment 3 - To set color (among 7 colors) for Segment 3
Ditto
Channel 4 - Segment 4 - To set color (among 7 colors) for Segment 4
Ditto
Channel 5 - Segment 5 - To set color (among 7 colors) for Segment 5
Ditto
Channel 6 - Segment 6 - To set color (among 7 colors) for Segment 6
Ditto
Channel 7 - Segment 7 - To set color (among 7 colors) for Segment 7
Ditto
Channel 8 - Segment 8 - To set color (among 7 colors) for Segment 8
Ditto
Channel 9 - Dimmer – To set brightness for all LEDs which are in ON
status
0-255 from full on to 0%
Channel 10 – Strobe – To set strobe in various speeds for all LEDs
which are in ON status
0-9 No
strobe
10-255
Strobe from slow to fast (up to 50Hz)
Channel 11 – Built-in programs run automatically or sound control
0-9
No
function
10-250
To choose built-in program (among 8 programs) running
automatically
251-255
Sound
control
Channel 12 – DMX Mode – To choose DMX mode (among 2 DMX
modes)
0-127
DMX
mode
1
128-255 DMX
mode
2
DMX Mode 2
Channel 1 - Segment 1 & 2– To select segment 1, or 2, or 1+2
0-9
Segment 1 OFF, Segment 2 ON
10-99
Segment 1 ON, Segment 2 OFF
100-199 Segment 1 OFF, Segment 2 ON
200-255 Segment 1 ON, Segment 2 ON
Channel 2 - Segment 3 & 4– To select segment 3, or 4, or 3+4
0-9
Segment 3 OFF, Segment 4 ON
10-99
Segment 3 ON, Segment 4 OFF
100-199 Segment 3 OFF, Segment 4 ON
200-255 Segment 3 ON, Segment 4 ON
Channel 3 - Segment 5 & 6– To select segment 5, or 6, or 5+6
0-9
Segment 5 OFF, Segment 6 ON
10-99
Segment 5 ON, Segment 6 OFF
100-199 Segment 5 OFF, Segment 6 ON
200-255 Segment 5 ON, Segment 6 ON
Channel 4 - Segment 7 & 8– To select segment 7, or 8, or 7+8
0-9
Segment 7 OFF, Segment 8 ON
10-99
Segment 7 ON, Segment 8 OFF
100-199 Segment 7 OFF, Segment 8 ON
200-255 Segment 7 ON, Segment 8 ON
Channel 5 - Red - To dim red LEDs from full on till off
0-255 Full on - off
Channel 6 - Green - To dim green LEDs from full on till off
0-256 Full on - off
Channel 7 - Blue - To dim blue LEDs from full on till off
0-257 Full on - Off
Channel 8 – Color macros - To choose macro (among 48 macros)
0-10 No function
11-255 To choose macro (among 48 macros)
Channel 9 - Dimmer – To set brightness for all LEDs which are in ON
status
0-255 from full on to 0%
Channel 10 – Strobe – To set strobe in various speeds for all LEDs
which are in ON status
0-9 No strobe
10-255 Strobe from slow to fast (up to 50Hz)
Channel 11 – Built-in programs run automatically or sound control
0-9 No function
10-250
To choose built-in program (among 8 programs) running
automatically
251-255 Sound
control
Channel 12 – DMX Mode – To choose DMX mode (among 2 DMX
modes)
0-127 DMX mode 1
128-255 DMX
mode
2
Block definition for LED PANEL450:
Segm.
1
Segm.
2
Segm.
3
Segm.
4
Segm.
5
Segm.
6
Segm.
7
Segm.
8
Block definition for LED PANEL500:
Segm.
1
Segm.
2
Segm.
3
Segm.
4
Segm.
5
Segm.
6
Segm.
7
Segm.
8
Master-slave running mode
When two or more LED PANEL450/500 are connected together, disconnect the DMX signal, and set one or more device to Sound Activation
Mode (see
No DMX Auto/Sound
), the LED PANEL450 / LED PANEL500 are then in Master-slave running mode.
Note
: The master will be randomly selected as one of the sound activated fixtures, and it is not fixed, it can change to another sound activated
fixture at any time.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are only to be carried out by
authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Take out the fuseholder under the power supply.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 220VAC, 50Hz
Powe consumption: 55W
Sound-control: via built-in microphone
Packing size (LxWxH):LED PANEL450/405x212x80mm; LED
PANEL500 /820x117x73mm
Net Weight: LED PANEL450 / 4.0 kg; LED PANEL500/ 4.5kg
Gross Weight: Panel450 / 4.3 kg;Panel500 / 4.8kg
Maximum ambient temperature t
a :
45° C
Maximum housing temperature t
b
(steady state) 60° C
Fuse: F 2A, 250V
Please note: Every information is subject to change without prior notice.
