6
3) in the Schematic diagram of the operation
，
Circle with the number of steps means a one-to-one
relationship in explaining the steps and the schematic diagram of the serial number of the serial
number for
Example
：
“
①
”or “1
）
”
；
in “
①
”and“1
）
”are Consistent
，
both mean first step or No. 1
Rear instruction
Power input socket
fuse DMX signal output port
Panel instruction
1)
Blackout Output black keys, pressing the button make light bright . when the control output
value of Platform, all channels to 0, resulting in black scenes
。
2)
Music Voice-activated key
，
pressing the button make light bright
，
Running the program is
triggered by the built-in microphone to run
。
3)
Scene Edit / Run Scene Editor / run key, if pressing time is more than 1 seconds, the indicator
light flashes into the scene editor state; then if pressing for 1 second again will withdrawn
from editing the state to the running state, Bright light is always on
。
4)
Chase Edit / Run walking light program editor / run key, if pressing time is more than 1
seconds, the indicator light flashes into the scene editor state; then if pressing for 1 second
again will withdrawn from editing the state to the running state, Bright light is always on
。
5)
Manual Manual control key
。
6)
Page1 Access keys page 1
。
7)
Page2 Access keys page 2
。
8)
Ch1/Ch9-Ch8/Ch16 Channel fader
（
page one 1-8 / page two 9-16
）。
9)
1-12 The number keys 1-12
（
Used to select the No. field, and follow procedures and signal
lights to choose
）。
10)
Step key is called as A key
，
（
run
）
Operation to remove lantern; (edit scenes) deleted scenes;
