background image

 

 

2

 

 

 

 

 

 

 

Every person involved with installation. operation and maintenance of this fixture has to   

- be qualified 

- follow the instruction of this manual 

- consider this manual to be part of the total product 

- Keep this manual for the entire service life of the product 

- pass this manual to every future owner or use of the product 

 

INTRODUCTION 

 

Thank you for choosing our fixture, if you follow up the instruction given in this manual we be sure that 

you will enjoy this product for a long period of time   

 
SAFETY INSTRUCTION 
 

 

 

 

 

 

 

This device has left our premises in absolutely perfect condition .In order to maintain this condition and 

to ensure a safe operation, it is absolutely necessary for the user to follow the safety instruction and 

warning notes written in this user manual.   

 

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the 

power-cord by the plug. Never pull out the plug by tugging the power-cord. Otherwise, the cable or plug 

can be damaged leading to mortal electrical shock. If the power plug or the power switch is not 

accessible, the device must be the disconnected via the mains. If the power plug or the device is dusty, 

the device must be take out of operation, disconnected and then be cleaned with a dry cloth, Dust can 

reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the device 

should only be removed by a specialist.   

 

There must never enter any liquid into power outlets, extension cords or any holes in the housing of the 

device. If you suppose that also a minimal amount of liquid may have exerted the device it must 

immediately be disconnected. This is also valid, if the device was exposed to high humidity. Also if the 

device is still running, the device must be checking by a specialist if the liquid has reduced any 

insulation. Reduced insulation can cause mortal electrical shock. There must never be any objects 

entering into the device. This is especially valid for metal parts. If any metal parts like staples or coarse 

metal chips enter into the device, the device must be taken out of operation and disconnected 

CAUTION! 

Be careful with your operations, With a dangerous voltage you can suffer a dangerous electric 

shock when touching the wires. 

CAUTION ! 

Keep this device away from rain and moisture 

Unplug mains lead before opening the housing 

For your own safety, please read this user manual carefully before you initially start-up 

Summary of Contents for COBPAR100T









Reviews: