involight A-000000-05950, User Manual

Page: 18 / 40

17
1.2
Intended Use:
This device is an effect spotlight that can be used to create decorative lighting effects. The INVOLIGHT
"LEDBARFX103" can be operated as a stand-alone device, in master / slave mode, via music control and via
DMX-512 protocol. The product has been developed for professional use in the area of event technology and is
not suitable for room lighting in households. This product is only approved for connection to 100-240 VAC / 50-60
Hz AC voltage and was designed exclusively for indoor use. When choosing the installation location, make sure
that the device is not exposed to excessive heat, moisture and dust. Make sure that there are no cables lying
around. You endanger your own and the safety of third parties! The ambient temperature must be between -5 ° C
and + 45 ° C. Keep the device away from direct sunlight and radiators. Do not operate the device until you have
become familiar with its functions. Do not allow the device to be operated by people who are not familiar with the
device. Please note that unauthorized changes to the device are prohibited for safety reasons. If the device is
used differently than described in this operating manual, this can damage the product and the guarantee will
expire. In addition, any other use with dangers such. B. short circuit, fire, electric shock, crashes etc. connected.
Teil 2: Installation:
Part 2: Installation:
Unpack the device and check it carefully for damage before using it. Place the device in a suitable place or hang it
on a suitable crossbar. If the device is suspended, the device must be secured with an approved safety rope. In
addition, the mounting bracket must be screwed on and tightened using the enclosed screws! Then connect the
device to the mains and, if required, connect a DMX cable and connect it to other devices or a DMX controller.
More about DMX or master / slave operation also in part 3.
During installation, the provisions of BGV C1 (formerly VBG 70) and DIN 15560 must be observed in
particular! The installation may only be carried out by authorized specialists!
IMPORTANT! Overhead installation requires a high level of experience. This includes knowledge of the calculation
of the load-bearing capacity, of the installation material used and safety inspections of the material used and the
projector, although the experience required is not limited to this. Under no circumstances try to do the installation
yourself if you do not have the necessary qualifications. Instead, hire a professional installer. Improper installation
can result in injury and / or property damage.
NOTE!
Use of tripods
If the device is mounted on a tripod, make sure that it stands securely and that the weight of the device does
not exceed the permissible load capacity of the tripod.
NOTE!
Please note that this device must not be connected to a dimmer.
Scope of delivery: 1x "LEDBARFX103", 2x mounting bracket, 1x power cord, 1x user manual