www.invisiblefence.com 7
Symptom:
Pet will not enter.
Possible Cause:
•
Signal field is too high. • Pet needs
additional training.
Action:
• Contact your Invisible Fence® Brand Dealer to check
signal field. • Contact your Invisible Fence® Brand Dealer for additional pet training.
Symptom:
MaxDog ™ Computer Collar® unit not responding to signal field (loop) wire.
Possible Cause
• Power Cap® unit in the MaxDog ™ Computer Collar® unit is dead or
weak. • Signal field wire has a break. • Power is not supplied to the transmitter or
power is out.
Action
• Replace the Power Cap® unit. • Contact your Invisible Fence®
Brand Dealer. • Make sure transmitter power supply is plugged in.
Important Warnings
Your Invisible Fence® Brand Dealer has professionally installed your pet containment
system and ensured it is working properly. You will want to perform periodic
maintenance checks to make sure the system is properly functioning for your pet’s safe
containment.
Invisible Fence® Brand pet containment systems have contained over two million
pets. However, there are some precautions you should take.
Warning 1:
Not every pet can be trained to avoid the established boundary. Sometimes even a
properly trained pet may cross the boundary. Therefore, Invisible Fence®, Inc., as well as
Invisible Fence® Distributors and Dealers cannot guarantee the system will, in all cases,
keep a customer’s pet within the established boundary. Accordingly, if a customer has
reason to believe that their pet may pose a danger to others, or harm itself, the customer
should not rely solely upon the Invisible Fence® Brand pet containment system to keep
the pet from crossing the boundary.
Warning 2:
The control panel component of the system includes visual and audible signals to warn of
a system malfunction. The control panel should be installed where such signals may be
easily seen and heard. If the control panel is installed in an enclosed box, or in a place not
readily accessible to the customer, the customer will not benefit from the system’s
warning functions, for which Invisible Fence®, Inc., as well as Invisible Fence®
Distributors and Dealers assume no responsibility.
Battery Disposal
Separate collection of spent batteries is required in many regions; check the regulations in
your area before discarding spent batteries. Please see page 5 of your manual for
instructions on how to remove the battery pack for separate disposal. The Computer
Collar® operates on 1 Lithium (Li-MnO2) battery with a 3 Volt, 160 mAH capacity,
replace only with an equivalent battery that can be obtained from your Invisible Fence®
Brand Dealer.
Important Recycling Advice
Please respect the Waste Electrical and Electronic Equipment regulations in your country.
This equipment must be recycled. If you no longer require this equipment, do not place it
in the normal municipal waste system. Please return it to where it was purchased in order
that it can be placed in our recycling system. If this is not possible, please contact your
Invisible Fence® Brand Dealer.
