background image

www.invisiblefence.com 

 

Operating Guide

 

 

The MaxDog

™ 

Computer Collar

® 

Unit 

The 

MaxDog

 ™ Computer Collar

® 

unit is a patented microprocessor-controlled device, 

powered by a patented Power Cap® unit. 

 
Note: ONLY use the post tightening tool to tighten the correction posts.Use of other tools 
will void the warranty. DO NOT secure the correction posts in the MaxDog™ Computer 
Collar® unit with any kind of glue or adhesive. 

Correction Post Retaining Strip 

Computer Collar Unit LED Status Indicator Collar Strap 

 
Fitting the MaxDog

™ 

Computer Collar

® 

Unit 

To work properly, the correction posts on the MaxDog ™ Computer Collar® unit must 
touch your pet’s skin. 
1. Position the collar strap high on your pet’s neck with the MaxDog™ Computer 
Collar® unit under your pet’s jaw. 
2. To avoid having a collar that is too tight on a thick-haired pet, thin some hair away in 
order to allow the correction posts to make contact with the skin. Do not shave the pet’s 
neck. 
3. Tighten the collar strap of the MaxDog ™ Computer Collar® unit appropriately. 
Adjust the collar strap so it is snug enough to slide only one finger between a correction 
post and your pet’s skin. 
4. Adjust the fi t of the MaxDog ™ Computer Collar® unit as necessary as your pet’s 
coat, weight, and age change. Your pet’s coat may change from season to season. 
5. Allow your pet to become accustomed to its new MaxDog ™ Computer Collar® unit. 
The collar must be removed each night during the first month of training. This ensures 
proper fit and avoids the possibility of 
skin irritation. 
6. After training is complete, remove your pet’s MaxDog ™ Computer Collar® unit each 
night if possible. This will help prevent irritation. However, if this it not possible, please 
check the tightness of the collar each time you feed your pet by removing the collar and 
then replacing it back on your pet. 
7. The MaxDog ™ Computer Collar® unit is waterproof. If the nylon collar strap 
becomes wet, it is recommended that it be removed from your pet and be allowed to air 
dry before replacing the collar on your pet’s neck. 

 
MaxDog

™ 

Computer Collar

® 

Power Cap

® 

Unit Status 

The MaxDog ™ Computer Collar® unit monitors Power Cap® unit Status. Each time 
you insert a Power Cap® unit into your MaxDog ™ Computer Collar® unit it performs a 
battery test. The LED status indicator will show a flashing light, indicating power status. 

At Start-Up 

 
 
 
 

Summary of Contents for MaxDog Computer Collar











Reviews: