Invest ISP 2.0, Installation Manual

Page: 23 / 36

C . Installation for vertical wall
The requirement to the wall body for mounting the collector on external wall:
The loadability of the external wall shall be 2 times than the weight of collector loaded fully with •
water and there shouldn’t be any deformation, crack or chip on the wall body. Its loadability shall be
confirmed through tests. In addition to its loadability to the solar collector, the necessary technical
measures shall be taken to treat the locations where the collector will be mounted, so as to prevent
the disadvantages to the wall body, such as deforming or cracks, etc.
The light-weight filled wall shall not be used as a structure to support the solar collector.
•
The support of the collector mounted on the external wall shall be fixed onto the built-in connector •
in the wall firmly. A concrete structural column could be added at the place o the built-in connector if
necessary, and it shall meet the requirement of anticorrosion.
There are two ways for mounting the collector onto the external wall, depending on the angle between the
collector and the external wall.
Mount the collector onto the wall vertically; •
Mount the collector onto the wall not vertically; •
Q