7
EnEn
1. LNB/Switch (DC Out) – F-type
Connect to the LNB/ Multiswitch to be setup/programmed.
2. Receiver (DC IN, RF Loop) – F-type
RF signal loop-through and power supply (10-20V/13W max.) from receiver or power inserter.
3. Status LED
Blinking yellow: communication with LNB/Multiswitch.
Steady green: configuration of connected dCSS device is same as configuration stored in
SatPal
TM
Controller (standalone mode).
4. Bluetooth connection status LED:
Blinking blue: not connected.
Steady blue: connected.
5. Signal Strength and Quality LED bars
Indicate signal strength and quality in standalone modesee, see
Figure 2 Signal Strength:
Figure 2 Signal Strength
6. User Button
User button function can be setup in the SatPal
TM
application.
7. PC (Data only) – micro USB
Connect to a PC to use SatPalTM Controller with PC application (power supply for the SatPalTM
Controller only, not powering the connected LNB/Multiswitch).
8.
DC in – micro USB
Power supply (5-6V/13W max.) from battery pack or AC/DC adapter.
9. Power Status LED
red: Power supply not sufficient for connected device.
yellow: Power supply sufficient to power connected device.
Summary of Contents for 5415 IDLU-SPAL03-OOOBT-OPP
Page 1: ...Quick Guide SatPal Controller 5415 IDLU SPAL03 OOOBT OPP Item 5415...
Page 2: ...2...
Page 37: ...37 En En...
