Inverter NN-T551CB, Service Manual

Page: 27 / 63

Removing the fan motor.
8.6. Door disassembly
1. Remove door C from door E by carefully pulling outward starting from the upper
right hand corner using a flat blade screwdriver.
2. Remove four screws holding the door E to the door A assembly.
3. Remove the door screen B by carefully un-clipping the screen from the door A
catch hooks. Care must be taken not to damage these hooks during disassembly.
4. Remove the door key and spring from the door E.
After replacement of the defective component parts of the door, reassemble and
follow the instructions below for proper installation and adjustment so as to prevent
excessive microwave leakage.
1. When mounting the door to the oven, be sure to adjust the door parallel to the
bottom line of the oven face plate by moving the upper hinge in the direction
necessary for proper alignment.