18
INSTALLATION AND ASSEMBLY
18
iV-Light ventilation device | Installation instructions
4
Installation and assembly
Read the section carefully before installation to avoid installation errors. The installation and
connection of the ventilation device must be carried out by qualified personnel.
4.1 Check the scope of supply
Check the delivery for completeness and transport damage upon receipt using the delivery note.
Report missing items immediately.
These assembly instructions describe the standard version of the product.
For the scope of supply of the external terminations variants, wall sleeves for integrating the
Connect controller platform and the interior closure variants, please refer to the separately
available installation instructions for the respective system component.
1 External termination
1 a: Light weather protection grille incl.
fastening elements for exterior wall
1 b: Sealing tape
1 c: End-stop tape
2 R-D160 wall sleeve
2 a: Styrofoam discs
2 b: Mounting wedges set
3 iV-Light thermal accumulator insert
3 a: Insulated thermal accumulator
3 b: Standard guiding vane (45 mm)
3 c: Xenion reversible fan
3 d: Slim guiding vane (16 mm)
3 e: BUS plug connection
4 Light inner cover
4 a: Inner cover base plate with
connecting element
4 b: Inner cover panel
4 c: ISO Coarse 60 % dust filter
i
1
2
3
4
1a
1b
1c
2
2a
2b
3a
3b
3c
3d
3e
4c
4b
4a
