manualshive.com logo in svg

Inverness Medical Inratio2, User Manual

Share
Download
Inverness Medical Inratio2 User Manual Download Page 28

EN

28

Display  Screen 

What it Means

Action to Take

The strip code is invalid. 

The QC1 test result is below 

the  control range of the 

monitor.

The QC1 test result is above 

the control range of the 

monitor. 

The QC2 test result is below 

the control range of the 

monitor. 

The QC2 test result is above 

the control range of the 

monitor. 

There is an error in 

calculating Prothrombin 

Time (PT) for this test. There 

may be a problem with the 

monitor and strips. 

Re-enter the correct code 

beginning with the first 

digit.

Repeat the test with a fresh 

test strip. If this message 

continues, call Technical 

Support for assistance.

Repeat the test with a fresh 

test strip. If this message 

continues, call Technical 

Support for assistance.

Repeat the test with a fresh 

test strip. If this message 

continues, call Technical 

Support for assistance.

Repeat the test with a fresh 

test strip. If this message 

continues, call  Technical 

Support for assistance.

 

Repeat the test with a fresh 

test strip. If this message 

continues, call Technical 

Support for assistance.

Summary of Contents for Inratio2





































Reviews:

No comments

Brands by name

Popular brands

Load more brands