EN
10
7. Changing the Monitor Settings
Follow these steps to change the date, time, units (how you want your test results displayed),
and whether you want to set a target range for your results.
1. Press and hold the button to turn the monitor ON
(Example timeout when being
prompted to apply blood)
The monitor will
automatically perform a self
test where all segments will
appear on the display.
The monitor will begin
preparing for a test for a few
seconds.
The monitor will then
prompt you to insert a test
strip.
NOTE:
You may access Setup mode whenever your monitor is turned on, or after performing
a test.
2. Enter Setup mode
Press the Setup button to enter Setup mode.
The Setup symbol ( ) will appear on the display along with the year that’s currently set in
the monitor.
NOTE:
When you turn on the monitor for the first time, the date will be set to 01/01/2004
and the time will be set to 12:00.
If you are using the external power supply, the monitor will stay on indefinitely.
NOTE:
Turning the monitor OFF manually when it is not
being used will help conserve battery power. If you are using
battery power, and the monitor is left idle for about 10
minutes, the monitor will count down for about 10 seconds
and then turn OFF. Press any button to keep the monitor
turned ON and return to the previous monitor display.
