In the Events table, can be programmed the reaction of the reader when after applying
the rfid tag.
O.n.
Name
Description
1
Sound
Action
An action that triggers a beep.
None (control by protocol)
- The audio generator is controlled by
the protocol HTTP, SMNP, MODBUS.
Every Card
- Activation of the sound generator occurs every time the
rfid tag is applied.
Recognize Card
- Activation of the sound generator takes place after
applying the active tag (stored in the reader's memory
2
LED/LCD
Backlight
Action
An action that activates the LCD display or LEDs.
None (control by protocol)
- The control is carried out through the
protocol HTTP, SMNP, MODBUS.
Every Card
- Signaling each time the rfid tag is applied
Recognize Card
- Signaling after applying the active tag (stored in
the reader's memory)
InU4 model back lighting of the display can be controlled.
When the value is set on 255 the displayed lights constantly.
When the value is set on 0 the back light is off.
When the value is set, for example on 5 the display will light for 5 seconds after
approaching the tag.
User manual RFID IND-U4, RFID IND-U2
Page
15
from
31
