troubleshooting
6
38
•
English
IVW6034A
DESCRIPTION
CHECK
FAULTCODE
W
ashi
Rinse
Dr
y
Ready
St
ar
t/P
ause
Inadequate water
supply.
• Check whether the tap is fully open and there nothing blocking the
water mains.
• Close the tap, remove the input hose and check whether it is clogged.
• Start the dishwasher again. Contact the service department of Inventum
when the error remains.
Water supply is not
stopping.
• Close the tap.
• Contact the service department of Inventum.
The waste water can
not be discharged.
• The water discharge hose is clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher’s program and check
the filters and the discharge hose. Restart the dishwasher.
• Contact the service department of Inventum when the error remains.
The water
temperature is not cor-
rect. Heating defect.
• Contact the service department of Inventum.
Safety is activated
against water
overflow.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
Faulty electronics.
• Contact the service department of Inventum.
Overheating error.
• Contact the service department of Inventum.
Faulty heat sensor.
• Contact the service department of Inventum.
