
cleaning & maintenance
6
Before cleaning the larder always unplug the appliance.
Clean the interior of the appliance. Use warm water and a neutral detergent to prevent any bad smells occurring. After cleaning, rinse
the interior with clean water and rub dry. Leave the appliance to dry for 1 to 2 hours. Simply remove the shelves, drawer and door
compartments to clean them by hand. Do not clean the interior accessories in the dishwasher.
Clean the outside of the larder and the gasket with a soft moist cloth.
We recommend that you dust the back of the appliance with a cloth or vacuum cleaner once a year in order to maintain a good output
and low energy consumption.
English
•
21
DEFROSTING THE COOLING COMPARTMENT
The defrosting of the cooling compartment is completely automatic. Droplets of water on the rear wall of the cooling compartment
indicate that the periodic automatic defrost cycle is in progress. The defrost water is automatically routed to a drain outlet and into
a container from which it evaporates. The drain hole should be cleaned periodically with the defrost drain plug to prevent the water
from collecting on the bottom of the refrigerator instead of flowing out.
Warning:
Never remove the ice with the aid of sharp objects, defrost sprays, a hair-drier, a heater, or similar items. This may lead to
unsafe situations and may cause irreparable damage to the appliance.
REPLACING THE BULB
When replacing the bulb, proceed as follows:
• Unplug the appliance from the power supply.
• Remove the lamp cover by pressing the hooks placed on both sides of the cover.
• First check if the bulb is fully screwed in.
• If the bulb is defective, replace it with a bulb of the same type: maximum 15 Watt, socket
E14. This kind is widely available.
• Place the cover in its place.
• Plug the appliance back into the power supply.
IKK1221S-1021S-0881S-instructions.indd 21
27-8-2014 9:42:21