inventum IKI6033, Instruction Manual

Page: 22 / 40

manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• For connecting, use an approved cable with the correct cable
diameters appropriate for the connection. The cable casing should
be made of rubber (preferably a cable that meets the directive 60227
IEC 53).
• The connection cable must hang freely and should not be fed through
a drawer. Attention: the maximum power cord length is 200 cm.
• The worktop into which the hob is fitted, should be flat.
• The walls and the worktop surrounding the appliance must be heat
resistant up to at least 100°C. Even though the appliance itself does
not get hot, the heat of a hot pan could discolour or deform the wall.
• Legislation requires that all electrical and electronic equipment
must be collected for reuse and recycling. Electrical and
electronic equipment marked with the symbol indicating
separate collection of such equipment must be returned to a
municipal waste collection point.
22
• English