INVENTOR V7CRI-12WiFiR/U7RS-12, User Manual

Page: 35 / 52

35
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode
.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.
Functia ECO / GEAR
Apasati butonul X-ECO pentru a intra in modul eficient de
energie: ECO

GEAR (75%)

GEAR (50%)

Απενεργοποίηση
εξοικονόμησης ενέργειας

ECO...
Nota: Functia este disponibila numai in modul COOL.
Functia ECO:
In modul de racire, apasand acest buton, telecomanda va regla automat temperatura la
24°C / 75°F, viteza ventilatorului pentru a economisi energie (numai atunci cand tempera -
tura setata este mai mica de 24°C / 75°F). Daca temperatura setata este peste 24°C / 75°F,
apasati butonul ECO, viteza ventilatorului se va schimba, temperatura setata va ramane
neschimbata.
NOTA:
Apasarea butonului ECO sau modificarea modului sau reglarea temperaturii setate la mai
putin de 24°C / 75°F va opri functionarea ECO.
In timpul functionarii ECO, temperatura setata trebuie sa fie de 24°C / 75°F sau mai mare,
se poate duce la o racire insuficienta. Daca simtiti inconfort, apasati din nou butonul ECO
pentru a opri aceasta functie.
Functia GEAR:
Apasati butonul ECO / GEAR pentru a intra in modul de operare GEAR dupa cum urmea-
za: 75% (pana la 75% consum de energie electrica)
50% (pana la 50% consum de energie electrica)
Mod de setare anterior.
In timpul functionarii GEAR, afisajul de pe telecomanda va alterna intre consumul de
energie electrica si temperatura setata.
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode
.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.
10
ECO/GEAR function
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
Press this button to enter the energy efficient mode in a sequence of
following:
ECO GEAR(75%) GEAR(50%) Previous setting mode ECO......
Note:This function is only available under COOL mode
.
ECO operation:
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
50%(up to 50% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electical energy consumption and set temperature.