INVENTOR V7CRI-12WiFiR/U7RS-12, User Manual

Page: 30 / 52

30
Butoane si functii
Inainte de utilizarea noului aparat de aer conditionat, familiarizati-va cu telecomanda
acestuia. In urmatoarele randuri regasiti o scurta prezentare. Pentru instructiuni legate
de functionarea aparatului de aer conditionat, consultati rubrica “Cum se folosesc func -
tiile de baza” din acest manual.
MODE
Derulati prin modurile de operare
dupa cum urmeaza AUTO

COOL

DRY
→
HEAT

FAN
ECO/GEAR
Apasati acest buton pentru a intra in
modul eficient de energie, dupa cum
urmeaza: ECO

GEAR(75%)

GEAR(50%)

Modul de setare anteri-
or
→
ECO...
ΟΚ
Utilizat pentru a confirma functiile
selectate.
TIMER
Seteaza temporizatorul pentru a porni
sau opri unitatea.
PORNIT / OPRIT
Porneste sau opreste unitatea.
TEMP
Creste temperatura la inter-
val de 1°C (1°F).
Temperatura maxima este de
30°C (86°F).
NOTA: Apasand concomitent
butoanele si timp de 3
secunde, temperatura de pe
afisaj va alterna intre °C & °F.
SET
Derulati prin functiile de
operare, dupa cum urmeaza:

Sleep ( )

Follow Me( )

AP mode ( ) ...
Simbolul selectat va clipi pe
afisaj. Apasati butonul OK
pentru a confirma.
BREEZE AWAY (nu este disponibil)
Aceasta caracteristica conduce fluxul
direct de aer care sufla si va face sa va
simtiti rasfatati.
NOTA: Aceasta caracteristica este
disponibila numai in modul COOL,
FAN si DRY.
TEMP
Scade temperatura la interval
de 1°C (1°F). Temperatura
minima este de 16°C (60°F).
LED
Activeaza si dezactiveaza afisajul
LED al unitatii interioare si buzzer-ul
aparatului de aer conditionat (in func-
tie de model), care creeaza un mediu
confortabil si linistit.
Turbo
Permite unitatii sa atinga temperatura
presetata in cel mai scurt timp posibil.
FAN SPEED
Selecteaza viteza de ventilatie
in urmatoarea succesiune:
AU

20%

40%

60%

80%

100%.
Apasand butonul TEMP si
pentru a creste/micsora vi -
teza ventilatorului la intervale
de 1% .
SWING
Porneste si opreste miscarea
orizontala a flapsului. Tineti
apasat timp de 2 secunde
pentru a initia functia de
oscilare automata a flapsului
vertical.
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
section of this manual.
Buttons and Functions
04
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
BREEZE AWAY - not available
LED
Turbo
ECO/GEAR
Scrolls through operation modes
as follows:
AUTO  COOL

DRY  HEAT  FAN
FAN SPEED
SWING
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
O O in 1 C(1 F) increments.
Min. temperature is
O O
16 C(60 F).
Starts and stops the horizontal
louver movement.
This feature avoids direct air flow
blowing on the body and makes
you feel indulging in silky coolness.
NOTE: This feature is available
under cool, Fan and Dry mode only
Set timer to turn unit on or off
ECO GEAR(75%)
GEAR(50%)
mode ECO
......
Scrolls through operation
functions as follows:
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Selects fan speeds in the
following order: AU


20%
60% 40% 80% 100%.
  
Press the TEMP or button
to increase/decrease the fan
speed in 1% increments.
Enables unit to reach preset
temperature in shortest possible
time.
Previous setting
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
Press this button to enter the
energy efficient mode in a
sequence of following:
Vane
Vane
Press to enter the louver setting
mode.
Sleep( ) Follow Me( )
AP mode ( ) Active
clean( ) ......
Active clean( )




Model: RG10N2(D2S)
CLEAN
Folosit pentru a porni / opri functia
Auto Clean sau Active Clean. (Depin -
de de model, va rugam sa consultati
MANUALUL DE FUNCTIONARE SI
INSTALARE AL UTILIZATORULUI).
Model:
RG10A(D2S)
Clean