INVENTOR NAM-ION200, User Manual

Page: 10 / 86

10
EN
Lock
Press the "FAN" and "TIMER" buttons simultaneously for one second to activate the lock
function. The "Lock" indicator illuminates. Press the buttons again, to turn off the lock function.
• When the air purifier is under “Lock” mode, you are not able to activate any other
function.
7. MAINTENANCE & CLEANING
Before performing any maintenance or cleaning of the air purifier, make sure the device is
unplugged.
l
FILTER CLEANING & REPLACEMENT:
The Filter Cleaning Indicator will flash in order to remind you that your purifier’s filter needs
to be cleaned. Use soft brushes or cloth to clean the air purifier.
• Do not use water or abrasive cleaning agents or solvents for cleaning.
• Do not use a dishwasher to clean the filter.
• Do not apply any water directly on or into the device while cleaning, as it may cause
rust, insulation deterioration or electrical shock.
• Re-position the filter. Press "ION" button for 3 seconds, the timer resets from the beginning.
• If this unit is operated in an area of heavy tobacco smoke, barbeque’s etc., within
a small period of time (a few weeks or months) the filter may produce an odor, due
to its absorbing capabilities. It is recommended to check the filter every 2- 5 days.
If the odor persists kindly replace the filter.
The air filter should
be checked and
cleaned
every
20
days