INVENTOR MOB-GPC09AH, Owner'S Manual, Page: 11 / 24

Names and functions of wireless remote control
●
ON/OFF button
ON/OFF
Remote control
Signal transmitter
▲
▲
▲
▲
▲
AUTO
COOL
DRY
FAN
HEAT
(Only for cooling and heating unit.)
Fan 2 Fan 1
Fan 3
Fan 4
Don't drop or throw the remote control; Don't let any liquid in the remote control and
Note: Be sure that there are no obstructions between receiver and remote controller;
put the remote control directly under the sunlight or any place where is very hot.
●
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed; Under Heat mode, the
initial value is 28
℃
;Under other
modes, the initial value is 25
℃ .
●
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
SLEEP button
SLEEP
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
●
B
y pressing this key,
you may select AUTO,
FAN 1, FAN 2, FAN 3
or FAN 4, and may
FAN button
FAN
cool mode.
After being energized, AUTO
is defaulted.
Only LOW fan can be set
(
o
F)
82
(
o
F)
77
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
not adjust the fan
speed, but can send
message.
under
DRY mode ,
pressing this key can
also cycle between
them. FAN 4 only in
●
SWING button
SWING
Press this key to activate or deactivate
the swing.
AUTO
COOL
DRY
FAN
HEAT
Operation of wireless remote control
－
7
－