INVENTOR L4VI32-09 User & Installation Manual Download

Page: 9 / 104

The indoor unit should be installed close to the wall.
Instructions for installation and use of this product are

provided by the manufacturer.

Precautions

WARNING

place, only the qualified person can perform the work.

Otherwise, it may cause personal injury or damage.

If you need to relocate the air conditioner to another

must be installed in the line.

For the air conditioner without plug, an circuit break

far away from animals or plants.If it is unavoidable,

please add the fence for safety purpose.

Select a location which is out of reach for children and

reachable after finishing installation.

For the air conditioner with plug, the plug should be

Working temperature range

NOTICE:

Indoor side DB/WB(

℃

)

Outdoor side DB/WB(

℃

)

Maximum cooling

32/23

43/26

Maximum heating

27/-

24/18

●

The operating temperature range (outdoor temperature) for cooling only unit is

For some models:

-15

℃

~ 43

℃

; for heat pump unit is -20

℃

~ 24

℃

NOTICE:

Indoor side DB/WB(

℃

)

Outdoor side DB/WB(

℃

)

Maximum cooling

32/23

43/26

Maximum heating

27/-

24/18

●

The operating temperature range (outdoor temperature) for cooling only unit is

-15

℃

~ 43

℃

; for heat pump unit is -15

℃

~ 24

℃

Summary of Contents for L4VI32-09









































































































Search results

Summary of Contents for L4VI32-09

Reviews:

Related manuals for L4VI32-09

Brands by name

Popular brands

INVENTOR L4VI32-09, User & Installation Manual

Search results

Summary of Contents for L4VI32-09

Reviews:

Related manuals for L4VI32-09

Brands by name

Popular brands