INVENTOR IW34BL, User Manual

Page: 12 / 56

Maintenance of wine cooler
Disconnect the cooler
Do not use hard brushes, clean steel balls, wire brushes, abrasives,
such as toothpastes, organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, acid or alkaline items clean the cooler
considering that this may damage the cooler surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties.
Unplug power plug to disconnect the cooler.
Stop to use the cooler
If the cooler left unused for a long time, please:
1.Unplug the cooler;
2.Clean the cooler;
3.Keep the cooler door open.
Clean the cooler
Dusts behind the cooler and on the ground shall be timely cleaned to improve the cooling effect and
energy saving. The interior of the cooler should be cleaned regularly to avoid odor. Cleaning procedure
is below:
1.Unplug power plug or disconnect cutoff
；
2.Clean door seal with only clear water and give thorough wipe
；
3.Use slightly warm water and a little dish soap to clean cooler
，
Do not let water spilt onto operation
control elements and illuminator on glazed door
；
4.Reconnect and power cooler when cleaning is completed.
Notes
Do not use detergent and solvent with sand or acid.
The drain hole shall be cleaned regularly to ensure water can be drained. Clean the drain hole with a thin
stick or something similar.
10