INVENTOR FSAI-SU-93AE3, Service Manual

Page: 58 / 94

Maintenance and
Disassembly
 Page 54 
Procedure Illustration
1) Remove the connector for the
compressor (see
CJ_ODU_INV_011).
2) Pull out the two blue wires connected
with the four way valve (see CJ_ODU_
INV_011).
3) Pull out connectors of the condenser
coil temp. sensor(T3),outdoor ambient
temp. sensor(T4) and discharge temp.
sensor(T5) (see
CJ_ODU_INV_011).
4) Disconnect the electronic expansion
valve wire (see Fig
CJ_ODU_INV_011).
5) Remove the connector for the DR and
reactor (see Fig CJ_ODU_INV_011).
6) Then remove the electronic control box
(see Fig
CJ_ODU_INV_011).
CJ_ODU_INV_011
Note: This section is for reference only. Actual unit appearance may vary.
Reactor
DR
T3, T4, TP
Compressor
4-Way Valve
Electronic Expansion Valve
FSOAIF-SU-243AE3