INVENTOR FSAI-SU-93AE3, Service Manual

Page: 57 / 94

Maintenance and
Disassembly
 Page 53 
3. Electrical parts
Note: Remove the panel plate and fan assembly (refer to 1. Panel plate and 2. Fan assembly) before
disassembling electrical parts.
Procedure Illustration
1) Remove the connector for the
compressor (see CJ_ODU_INV_010).
2) Pull out the two blue wires connected
with the four way valve (
CJ_ODU_
INV_010).
3) Pull out connectors of the condenser
coil temp. sensor(T3),outdoor ambient
temp. sensor(T4) and discharge temp.
sensor(TP) (
CJ_ODU_INV_010).
4) Disconnect the electronic expansion
valve wire ( CJ_ODU_INV_010).
5) Then remove the electronic control
box (see
CJ_ODU_INV_010).
CJ_ODU_INV_010
Compressor
T3, T4, TP
Electronic Expansion Valve
4-Way Valve
FSOAI-SU-93AE3 FSOAI-SU-123AE3
FSOAIF-SU-183AE3