1
2
Slim
28
INSTALLATION AND ASSEMBLY
iV-Office ventilation device
•
Installation and operating instructions
►
Insert the inVENTron from the interior into
the wall sleeve so that you can reach the BUS
plug connection.
Make sure that the narrow Slim guiding vane
[16 mm] is directed towards the interior.
The thermal accumulator insert has been inserted.
Inserting the thermal accumulator
NOTE
Do not store/stack the thermal accumulator outside the wall sleeve,
as doing so will damage the thermal accumulator's ceramic.
• Insert the thermal accumulator immediately after removing it from the packaging.
Requirements:
The weather protection hood is installed.
The sound insulation lining is inserted.
►
From the interior, slide the thermal accumulator
towards the weather protection hood until it stops.
Make sure
that the handle is pointing towards
the interior.
Ensure
that the fan BUS protrudes into the interior.
