background image

User Manual

XC2600 Handheld Reader

11

5.Operating Mode 

This equipment can be paired with other Bluetooth-equipped devices via 

Bluetooth. By using other terminal devices installed with demo application of 

the XC2600 reader, you can control the device by this Invengo Demo directly. 

The device may switch into offline mode and work independently when loss the 

connection with Bluetooth terminal devices temporarily, when the Bluetooth are 

successfully connected, the local data can be uploaded to the demo software.

5.1 Online Mode

When the device connects with a Bluetooth terminal, it works in Online working 

mode. Under this mode, you can control equipment working mode with Invengo 

Demo of the Bluetooth terminal. You can choose mobile phone, tablet computer 

and other Bluetooth terminals for operating terminals. The APIs for JAVA 

platform are currently available.
For detailed operation, refer to the Invengo Demo operating instructions of 

chapter VI.

5.2 Offline Mode

When the Bluetooth connection is not established, it will automatically enter 

the offline mode. Working data can be stored locally in offline mode. The main 

features of offline working mode are shown as follows:
 Module which was working before offline mode continues
 Buzzer works unconditionally 
 Read data is stored in local memory

You need to set the data saving interval in online mode to ensure the regular 

operation of the device. The Flash interval is the time interval that working data 

stored in RAM before writing into Flash, set an appropriate time interval to 

ensure cached data is not lost. Click “More”, then click “Time Interval”, insert a 

value between 1 and 60, then click “Configure”, you may also “Query” current 

parameter by clicking “Query”. Please refer to Figure 7 below.

5. OPerating Mode

Summary of Contents for XC2600









































Reviews: