4
Document Number
DCV-00214
Date Released
Mar. 2017
Revision Number/Security level
R00 S2
Retrofit G6+InvencoLink GVR Encore 500S (US) Installation Guide
1 Introduction
The documentation provides some basic guidelines for installing the Optic 5 / G6 Outdoor Payment
Terminal (OPT) system.
This Retro-Fit Kit can be installed into either Side A or Side B of a GVR Encore 500S dispenser;
•
For a single-sided installation, or if this Kit will be installed into Side One (i.e. the first side
installed) of a double-sided installation, it requires the pre-installation of UL Listed by Report
Retrofit Kit Part Number 6009-0008-8801 (InvencoLink Converter) before installation into the
dispenser.
The process is covered in §4.2 Pre-Installation Procedure of this instruction, by reference
to the instructions in that Kit.
•
For a double-sided installation, two of these Kits are required.
1.1
Tools Required
The following tools are required to mount the G6 OPT:
•
Gilbarco “CH 751” Key
•
Gilbarco “GBCO” Key
•
Philips #1 screwdriver
•
Philips #2 screwdriver
•
Flat 5mm screwdriver
•
Side cutters
•
Cable (zip) ties
•
Pliers
•
¼” Socket or Nut Driver
WARNING
Do NOT
use power tools if working on a fuel station forecourt.
Any spark could cause an explosion.
