SECTION 7—SEAT AND ARMS
32
Adjusting Seat Height - Deluxe Seat Only
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the seat. Refer to Removing/Installing the Deluxe Seat on page 31.
2. Remove the quick-release pin that secures the seat post to the frame tube.
3. Align the frame tube mounting hole with one (1) of three (3) seat post mounting holes
to achieve desired seat height.
4. Insert the quick-release pin through both the frame tube and the seat post.
NOTE: Ensure that the detent ball is visible outside the frame tube.
5. Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31.
FIGURE 7.4
- Adjusting Seat Height - Deluxe Seat Only
Adjusting 90° Seat Swivel - Deluxe Seat Only
WARNING
Ensure that seat is locked into the forward position BEFORE and DURING
operation of the scooter. Otherwise, injury to the user and/or damage to the
scooter may result.
CAUTION
DO NOT use the seat swivel option when accessories are installed (such as safety
flag, crutch/cane holder, etc.) and the seat is mounted in lowest height adjustment
position. Otherwise, damage to the scooter may occur.
Seat Post
NOTE: Tiller not
shown for clarity.
Frame Tube
Quick-Release
Mounting Holes
