Setup
1.
Loosen hardware in multi-offset bracket
A
.
2.
Adjust headrest to desired position.
3.
Re-tighten hardware.
4.12 LNX Legrest
4.12.1 Setting the Length of the Legrest
If needed, the legrest can be pre-set to 83° or 97° instead
of 90°. Contact your Invacare provider.
•
4 mm Allen key
•
10 mm open-ended wrench
You can adjust the length of the legrests independently of
one another.
Fig. 4-42
1.
Remove screws
A
at the front of legrest.
2.
Remove cover together with calf pads.
3.
Loosen nuts
B
at the side of legrest.
It may be necessary to remove the nuts and move them
from one slot to the other.
4.
Set desired length.
5.
Retighten nuts.
6.
Refit the calf pads and cover and retighten screws.
60101832-A
49
Summary of Contents for Ultra Low Maxx
Page 83: ...Notes ...
