Invacare® Ultra Low Maxx by Motion Concepts
CAUTION!
Risk of Injury or Damage to Wheelchair
Removing both magnets leaves Quad Link without
lock. Quad link could retract unintentionally.
– Always leave at least one magnet.
•
Small pointed tool such as paper clip
Fig. 4-5
1.
Swivel Quad Link to side to access magnets.
2.
Insert tool in hole
A
and push out magnet on other
side.
4.4.4 Swivelling the Remote to the Side
WARNING!
– Make sure fingers are not between the linkage
bars when locking the Quad Link retractable
remote mount into position. Pinch points will
occur between the linkage bars when locking
the Quad Link retractable remote mount into
position.
Fig. 4-6
Swivel Remote to the Side
1.
Fig. 4-7
To retract the remote from the normal extended
position, push outward on the inside surface of the
remote until the Quad Link is free.
The Quad Link works the best when the remote
is pushed outward on the inside surface of the
remote, near the armrest pad.
2.
Push the remote outward and rearward until the Quad
Link moves through its complete range into its fully
retracted position.
34
60101832-A
Summary of Contents for Ultra Low Maxx
Page 83: ...Notes ...
