Invacare Tracer SX5 Recliner Owner'S Operator And Maintenance Manual Download

Page: 56 / 56

Invacare Corporation

www.invacare.com

USA

Canada

One Invacare Way

570 Matheson Blvd E Unit 8

Invacare and Tracer are registered

Elyria, Ohio USA

Mississauga Ontario

trademarks of Invacare Corporation.

44036-2125

L4Z 4G4 Canada

Yes, you can. is a trademark of Invacare

800-333-6900

800-668-5324

Corporation.

3-in-1 and WD-40 are registered

trademarks of the WD-40 Company.

Teflon is a registered trademark of E.I.

Du Pont De Nemours and Company.

Part No. 1110550

Rev A 08/02

OPTIONS

LIMITED WARRANTY

PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH

FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights which

vary from state to state.
Invacare warrants its product to be free from defects in materials and workmanship for a

period of one (1) year from date of purchase. The side frames and crossmembers are

warranted for the lifetime of the original purchaser/users. If within such warranty period

any such product shall be proven to be defective, such product shall be repaired or re-

placed, at Invacares option. This warranty does not include any labor or shipping charges

incurred in replacement part installation or repair of any such product. Invacares sole

obligation and your exclusive remedy under this warranty shall be limited to such repair

and/or replacement.
For warranty service, please contact the dealer from whom you purchased your Invacare

product. In the event you do not receive satisfactory warranty service, please write directly

to Invacare at the address at the bottom of this page. Provide dealers name, address, the

product model number, date of purchase, indicate nature of the defect and, if the product

is serialized, indicate the serial number. Do not return products to our factory without our

prior consent.
LIMITATIONS AND EXCLUSIONS: THE FOREGOING WARRANTY SHALL NOT

APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN

REMOVED OR DEFACED, PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT,

IMPROPER OPERATION, MAINTENANCE OR STORAGE, PRODUCTS MODIFIED

WITHOUT INVACARES EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT

LIMITED TO, MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR

ATTACHMENTS; PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY

COMPONENT WITHOUT THE SPECIFIC CONSENT OF INVACARE, OR TO A PROD-

UCT DAMAGED BY CIRCUMSTANCES BEYOND INVACARES CONTROL, AND

SUCH EVALUATION WILL BE SOLELY DETERMINED BY INVACARE. THE WAR-

RANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL WEAR OR

FAILURE TO ADHERE TO THESE INSTRUCTIONS.
THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY

OTHER WARRANTIES WHATSOEVER, WHETHER EXPRESS OR IMPLIED, INCLUD-

ING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, AND THE SOLE REMEDY FOR VIOLATIONS OF ANY

WARRANTY WHATSOEVER, SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF

THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. THE

APPLICATION OF ANY IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND

BEYOND THE DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN.

INVACARE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES WHATSOEVER.
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL

LAWS AND REQUIREMENTS.

MADE IN MEXICO

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for Tracer SX5 Recliner

























































Search results

Summary of Contents for Tracer SX5 Recliner

Reviews:

Related manuals for Tracer SX5 Recliner

Brands by name

Popular brands

Invacare Tracer SX5 Recliner, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Tracer SX5 Recliner

Reviews:

Related manuals for Tracer SX5 Recliner

Brands by name

Popular brands