Terminator SS
14
Part No. 1052712 Rev D
SAFETY INSPECTION
SECTION 2
SAFETY
INSPECTION
Section 2 - Safety Inspection - includes the following:
Safety Inspection Checklist
Troubleshooting
Maintenance
NOTE: Every six (6) months, take your wheelchair to a qualified technician for a thorough inspection
and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation
of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any
other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair. Clean
upholstery with mild soap and water or spray disinfectant using a sponge. DO NOT use bleach or
wash in a washing machine.
SAFETY INSPECTION CHECKLIST
Initial adjustments should be made to suit your personal body structure and preference.
Thereafter follow these maintenance procedures:
ITEM
INITIALLY INSPECT/ INSPECT/
INSPECT/
ADJUST
ADJUST
ADJUST
WEEKLY MONTHLY PERIODICALLY
GENERAL
Wheelchair rolls straight (no excessive drag/pull to one side).
X
X
WHEEL LOCKS
Do not interfere with tires when rolling.
X
X
Pivot points free of wear and looseness.
X
X
Wheel locks easy to engage.
X
X
SEAT AND BACK UPHOLSTERY
Inspect for rips or sagging.
X
X
Inspect fastening flaps to ensure they securely latch.
X
X
REAR WHEELS
Quick release axles and camber inserts are clean.
X
X
Adjustable Axle Position Camber Bar is securely tightened.
X
X
X
Quick/Quad release axles lock properly.
X
X
No excessive side movement or binding when lifted and spun.
X
X
HANDRIMS
Inspect for signs of rough edges or peeling.
X
X
SPOKES
Inspect for bent or broken spokes.
X
X
All spokes uniformly tight.
X
X
FRONT CASTER
Inspect wheel/fork assembly for proper tension by spinning
caster; caster should come to a gradual stop.
X
X
Loosen/tighten locknut if wheel wobbles noticeably or binds
to a stop.
X
X
Wheel bearings are clean and free of moisture.
X
X
X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced if damaged.
TIRES
Inspect for flat spots and wear.
X
X
If pneumatic tires check for proper inflation.
X
X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced if damaged.
ELASTOMERS
Inspect elastomers for proper lubrication.
X
CLEANING
Clean upholstery and armrests.
X
X
All manuals and user guides at all-guides.com
