Part No 60121632 Rev A
3 Instructions, Force G Customer Assembly
Small Components and Verification
1)
For each “Small Component Bag” (1
-4), remove the verification sheet
and lay out on a flat and level surface.
2)
Remove small components from bag and place them on the verification
sheet in their outlined areas.
a.
NOTE: From hereon we will refer to
the “Small Component
Verification” sheet and their associated components by the
sheet number located at the top right-hand corner of the
page.
3)
Once you’ve confirmed that all small components are present. Proceed
to the assembly instructions.
4)
If you discover any components are missing, please contact our
Customer Service Department with your serial number and the Part
Number / Description of the missing component(s).
Preparing for Assembly
1)
Your product has shipped with the basic tools required to assemble
your product. We do recommend you also have the following tools to
optimize the assembly process.
a.
Sharp Scissors or Side Cutters
b.
Torque Wrench
c.
Medium/Large flathead screwdriver
d.
Tape Measure
e.
Air Pump
f.
Ratcheting Wrenches and Hex Keys for ease of use
g.
Some good music, an amusing friend and
your drink of choice…
