Invacare Top End Crossfire T6 Owner'S Operator And Maintenance Manual Download

Page: 17 / 64

SECTION 2—SAFE HANDLING

Part No 1134872

Crossfire

™

Series Wheelchairs

Coping with Everyday Obstacles

Coping with the irritation of everyday obstacles can be alleviated somewhat by learning

how to manage your wheelchair. Keep in mind your center of gravity to maintain stability

and balance.

A Note to Wheelchair Assistants

When assistance to the wheelchair user is required, remember to use good body

mechanics. Keep your back straight and bend your knees whenever tilting the wheelchair

or traversing curbs, or other impediments.

WARNING

DO NOT attempt to lift a wheelchair by lifting on any removable (detachable)

parts. Lifting by means of any removable (detachable) parts of a wheelchair may

result in injury to the user or damage to the wheelchair.

Also, be aware of any removable (detachable) parts. These must NEVER be used to move

the wheelchair or as lifting supports, as they may be inadvertently released, resulting in

possible injury to the user and/or assistant(s).
When learning a new assistance technique, have an experienced assistant help you before

attempting it alone.

Percentage of Weight Distribution

WARNING

DO NOT attempt to reach objects if you have to move forward in the seat or pick

them up from the floor by reaching down between your knees.
The position of the footrest, camber tube, back angle, the tautness of the back

upholstery as well as the user's condition are directly related to the wheelchair's

stability. Any change to one or any combination of the five may cause the wheel-

chair to decrease in stability. Use EXTREME caution when using a new seating posi-

tion. The addition of anti-tippers may be required.

NOTE: For this procedure, refer to FIGURE 2.1.

Many activities require the wheelchair owner to reach, bend and transfer in and out of the

wheelchair. These movements will cause a change to the normal balance, the center of

gravity, and the weight distribution of the wheelchair.
To determine and establish your particular safety limits, practice bending, reaching and

transferring activities in several combinations in the presence of a qualified health-care

professional before attempting active use of wheelchair.

Summary of Contents for Top End Crossfire T6

































































Search results

Summary of Contents for Top End Crossfire T6

Reviews:

Related manuals for Top End Crossfire T6

Brands by name

Popular brands

Invacare Top End Crossfire T6, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Top End Crossfire T6

Reviews:

Related manuals for Top End Crossfire T6

Brands by name

Popular brands