Invacare Top End Crossfire T6 Owner'S Operator And Maintenance Manual Download Page 11

Page: 11 / 64

TYPICAL PRODUCT PARAMETERS

Part No 1134872

Crossfire

™

Series Wheelchairs

TYPICAL PRODUCT PARAMETERS

NOTE: All specifications are approximate

CROSSFIRE

FRAME:

6061T6 Aluminum

FRONT FRAME:

Tapered front end (Standard), V-Style (Optional)

FRONT FRAME ANGLE:

70°, 75°, 80°, 85° or 90°

FOOTREST:

Tubular footrest in same material as frame (Standard),

Adjustable Angle NCO, Plastic or Carbon Fiber Cover (Optional)

SEAT HEIGHT

FRONT:

REAR:

16 to 21 inches (Fixed)

14 to 20 Inches (Fixed), Ergo Level Seat (Optional)

ARMS (OPTIONAL):

Swing-away Style

SIDE GUARDS (OPTIONAL)

FOLDING BACK:

FIXED BACK:

Removable, Folding, Removable with Fender

Fixed Aluminum, Fixed Carbon Fiber

SEAT WIDTH:

12 to 18 inches (Standard), 19 to 20 inches (Optional),

Tapered Seat Width (Optional)

SEAT DEPTH:

14 to 18 inches (Standard), 19 to 20 inches (Optional)

SEAT-TO-FLOOR:

Front

- 16 to 20 inches Fixed,

Rear

- 14 to 20 inches Fixed

BACK STYLE:

Folding (Standard), Fixed (Optional)

BACK HEIGHT

ADJUSTABLE:

FIXED:

8 to 11, 10 to 14, 14 to 18, or 16 to 20 inches

8 to 16 inches

BACK ANGLE

FOLDING:

FIXED:

-15°, -10°, -5°, 0° and 5°

0°, 3°, 6°, and 9°

BACK UPHOLSTERY:

U240 Black - Adjustable Tension by Straps

SEAT UPHOLSTERY:

U240 Black - Adjustable Tension by Straps

AXLE POSITIONS/

CENTER OF GRAVITY:

Adjustable to 4¼ inches in two positions:

Amputee Position: -2¼ to 2 inches

Active Position: 1¼ to 5½ inches

REAR WHEEL AXLE:

Quick Release (Standard), Quad-Release or Titanium (Optional)

REAR WHEEL CAMBER

CAMBER TUBE:

0°, 3°, 6°, or 9°

REAR WHEELS

REAR WHEEL SIZE:

REAR WHEEL TYPE:

22, 24 or 25-inch (Standard), 26-inch (Optional)

High Performance with Primo Tires (Standard),

Spinergy® Spox, knobby, KIK® and Kenda Tires (Optional)

HANDRIMS:

Aluminum Anodized (Standard) Titanium, Coated, Natural Fit®

(Optional)

WHEEL LOCKS:

Push to Lock (Standard) or Scissor lock (Optional)

FRONT FORKS:

Non-Suspension (Standard), Suspension (Optional)

Summary of Contents for Top End Crossfire T6

































































Search results

Summary of Contents for Top End Crossfire T6

Reviews:

Related manuals for Top End Crossfire T6

Brands by name

Popular brands

Invacare Top End Crossfire T6, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Top End Crossfire T6

Reviews:

Related manuals for Top End Crossfire T6

Brands by name

Popular brands