SECTION 12—BATTERIES
Part No 1149267
57
TDX® SC TDX® Spree
Using the Proper Batteries
NOTE:
For
this
procedure,
refer
to
FIGURE 12.1.
1. Place
battery
on
ground/flat
surface.
2. Visually
draw
a
horizontal
and
vertical
centerline
through
the
middle
of
battery
(FIGURE 12.1).
3. Position
the
battery
so
that
the
terminals
are
above
the
horizontal
centerline.
4. Visually
inspect
the
battery
to
ensure
the
correct
position
of
the
POSITIVE
and
NEGATIVE
terminals
(FIGURE 12.1).
WARNING
Batteries with terminal configuration as shown below MUST be used. Batteries that
have the reverse terminal configuration MUST NOT be used - otherwise injury and
damage may occur.
FIGURE 12.1
Using the Proper Batteries
Removing/Installing the Batteries
WARNING
ALWAYS use the battery handle when lifting the battery. It is the most convenient
method and assures that the battery acid will not spill. It also helps to prolong the
life of the battery.
DO NOT tip the batteries. Keep the batteries in an upright position.
DO NOT Use
POSITIVE (+)
Battery Terminal
U1 Battery
U1 Battery
POSITIVE (+)
Battery Terminal
NEGATIVE (-)
Battery Terminal
Use This Configuration
NEGATIVE (-)
Battery Terminal