SECTION 7—MOTOR LOCKS
Part No 1149267
49
TDX® SC TDX® Spree
SECTION 7—MOTOR LOCKS
WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
Disengaging/Engaging Motor Lock Levers
WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
NOTE:
For
this
procedure,
refer
to
FIGURE 7.1.
NOTE:
Motor
lock
disengagement/engagement
allows
free
‐
wheeling
or
joystick
controlled
operation.
Free
‐
wheeling
allows
an
assistant
to
maneuver
the
wheelchair
without
power.
NOTE:
Motor
lock
levers
are
located
between
the
rear
caster
assembly
and
drive
wheel
on
both
sides
of
the
wheelchair.
1. Perform
one
of
the
following
(FIGURE 7.1):
• Disengage
(PUSH)
‐
Pull
motor
lock
levers
out,
away
from
wheelchair
to
disengage
the
motor.
• Engage
(DRIVE)
‐
Push
motor
lock
levers
in,
towards
the
wheelchair
to
engage
the
motor.
FIGURE 7.1
Disengaging/Engaging Motor Lock Levers
Motor Lock Lever ENGAGE (Drive)
Motor Lock Lever DISENGAGE (Push)
Outside of
Wheelchair
Motor Lock Lever
Rear Caster
Assembly
Drive Wheel