8.4.2 Making batteries accessible
WARNING!
Fire and burn hazard due to short circuit at
battery poles
– Do not short-circuit the battery poles with a
tool or metal parts of the wheelchair.
– Make sure that the battery pole caps are
attached at all times when you are not working
on the battery poles.
CAUTION!
Risk of crushing
The batteries are very heavy. There is a risk of
hand injury.
– Be aware that the batteries are very heavy.
– Handle the batteries with care.
When removing, pay attention to small parts such as
screws and washers. Lay out all the small parts so
that they can be installed in the correct sequence.
1.
Remove the rear shroud as described in section
.
2.
Push both locking bolts (1) inward and open the battery
shroud.
3.
Fig. 8-7
Pull the latch
A
next to the power module to the left
and then out.
1547067-H
59
