Rea® Spirea® 4 NG
7.5.4 Remove the legrest angle adjustable
A
B
1.
Push the lever
A
inwards.
2.
Turn the legrest
B
outwards.
3.
Lift of the legrest.
7.5.5 Remove the footrest fixed
B
A
1.
Push the handle
A
forwards or sidewards.
2.
Turn the footrest
B
outwards.
3.
Lift off the footrest.
7.5.6 Remove the rear wheels
A
1.
Press the quick release button
A
.
2.
Pull the rear wheel straight out.
3.
Remove the rear wheel.
4.
Repeat the procedure on the opposite side.
7.6 Transporting the Mobility Device
without Occupant
CAUTION!
Risk of injury
– If you are unable to fasten your mobility
device securely in a transport vehicle, Invacare
recommends that you do not transport it.
Your mobility device may be transported without restrictions,
whether by road, rail or by air. Individual transport
companies have, however, guidelines which can possibly
restrict or forbid certain transport procedures. Please ask
the transport company regarding each individual case.
•
Invacare strongly recommends securing the mobility
device to the floor of the transporting vehicle.
7.7 Transporting the occupied wheelchair
in a vehicle
Even when the wheelchair is properly secured and the
following rules are met, injuries to passengers may occur
in a collision or sudden stop. Therefore Invacare strongly
recommends transferring the wheelchair user to the vehicle
seat with the seatbelt on. Do not make alterations or
substitutions to points of the wheelchair (structure, frame or
parts) without the written consent of Invacare Corporation.
The wheelchair has been successfully tested according to the
requirements of ISO 7176–19 (Frontal impact).
WARNING!
Risk of serious injury or death
To use the wheelchair as a seat in a vehicle the
backrest height minimum must be at least 400
mm.
To transport the wheelchair with user in a vehicle, a
restraint system must be installed in the vehicle. Wheelchair
tie-downs and occupant restraint systems must be approved
according to ISO 10542-2. Contact your local Invacare
authorized provider for more information on getting and
installing an approved and compatible restraint system.
WARNING!
If, for some reason, it is impossible to transfer the
wheelchair user to a vehicle seat, the wheelchair
can be used as a seat in a vehicle if the following
procedures and regulations are followed. A
transportation kit (optional) have to be fitted on
the chair for such a purpose.
– The wheelchair must be secured in the vehicle
with a 4-point wheelchair restraint system.
– The user must wear a 3-point passenger
restraint system secured to the vehicle.
– The user can be additionally secured with a
posture belt in the wheelchair.
WARNING!
Safety restraint devices must only be used when
the wheelchair user's weight is 22 kg or more
(ISO-7176-19).
– Do not use the wheelchair as a seat in a vehicle
when the user weight is lower than 22 kg.
32
1536533-F
