Invacare rea Focus, User Manual

Page: 8 / 48

Rea® Focus™
3 Setup
3.1 Delivery check
Any transport damage must be reported immediately to the transport
company. Remember to keep the packaging until the transport
company has checked the goods and a settlement has been reached.
3.2 Assembly
When you receive your wheelchair, you either fit the backrest or, on
some models, fold up the backrest. You also have to fit the armrests
and legrests onto the chair. The assembly is simple and does not
require any tools.
3.2.1 Fitting the rear wheels
A
B
C
1. Press and hold in the quick—release button
B
in the center of
the hub.
2. Put the rear wheel and the rear wheel axle
C
in the rear wheel
attachment A .
3. Pull the wheels outwards to check that the wheel is securely
locked in its position.
WARNING!
Risk of injury
–
Check that the rear wheel is securely locked in its
position! It should not be possible to remove the
wheels when the quick-release button is inactivated.
3.2.2 Fitting the seat
A
B
There are two ways to unfold the seat:
•
Push the handle in the middle of the seat plate downwards
A
.
•
Lift the rear wheel slightly upwards and push the push handles
outwards
B
. When the seat plate is in the correct position, a
“click” sound will be heard.
WARNING!
Risk of trapping fingers
– Be careful not to trap your fingers or hand when the
seat plate is pushed in position.
3.2.3 Fitting the backrest bar
A
B
1. Fold up the backrest bar
A
.
2. Secure the backrest bar in the attachment with the quick-release
knob
B .
Make sure that the quick-release knob B is securely locked
in its position.
3.2.4 Fitting the armrests
Flip—up armrests:
A
B
1. Insert the armrest A in the attachment B on the backrest frame.
2. Fold down the armrest A to fit it into the correct position.
Detachable armrests:
A
B
C
8 1431580-B