Snap hook symbols
Depending on the configuration, some wheelchairs may be
used as a seat in a motor vehicle, some may not.
ISO 717 6-19
Tie-down positions where the restraint
system straps must be placed in case of
transporting the occupied wheelchair in a
motor vehicle. This symbol is only attached
to the wheelchair when it is ordered with the
transportation kit option.
WARNING Symbol
This wheelchair is not configured for
passenger transport in a motor vehicle. This
symbol is attached to the frame close to the
identification label.
2.5 Symbols on Electrical Version
Waste disposal and recycling
information. See section “After Use”,
“Waste disposal”
CLASS II equipment
Product with a thermal fuse
Type B
Applied Part
Applied Part complying with the
specified requirements for protection
against electrical shock according to
IEC60601-1.
Safety Isolation transformer, general
1653395-C
7
Summary of Contents for Rea Clematis Pro
Page 46: ...Notes...
Page 47: ...Notes...
