4 Options
4.1 Headrest/Neckrest
4.1.1 Adjusting the Height
The height and the removal are operated by the
hand wheel. The bar is equipped with an adjustable
stop block.
1.
Loosen the screw in the stop block
B
with 5 mm Allen
key.
2.
Loosen the hand wheel
A
.
3.
Adjust the headrest to the desired position.
4.
Re-tighten the hand wheel
A
.
5.
Slide the stop block
B
down to the top of the headrest
attachment.
6.
Re-tighten the screw (5–6 Nm).
It is now possible to remove the headrest/neckrest
and reinsert it in the desired position without further
adjustments.
4.1.2 Adjusting the Depth / Angle
1.
Loosen the handle
B
.
2.
Loosen the two screws
A
with 5 mm Allen key.
3.
Adjust the depth and angle of the headrest/neckrest.
4.
Re-tighten the handle and the two screws (5–6 Nm).
4.1.3 Adjusting the Width
1.
Loosen the four screws
A
with 5 mm Allen key.
2.
Slide the bracket to adjust the width of the neckrest /
headrest.
3.
Re-tighten the four screws (5–6 Nm).
4.
The headrest can be additionally adjusted in width,
loosen the screw
A
with 5 mm Allen key.
5.
Re-tighten the screw
A
(5–6 Nm).
4.2 Adjusting the Hemiplegic Armrest
1.
Loosen the screw
A
with 5 mm Allen key.
2.
Remove the original armrest.
3.
Mount the hemiplegic armrest
C
in the armrest pole.
4.
Re-tighten the screw
A
.
5.
The hemiplegic armrest can be adjusted in angle. The
resistance can be increased/decreased by adjusting the
screw
A
.
1653395-C
17
Summary of Contents for Rea Clematis Pro
Page 46: ...Notes...
Page 47: ...Notes...
