Invacare Rea AB
Växjövägen 303
SE-343 71 Diö
Sweden
1605201
-A
2017-01-01
2
Backrest
C
D
E
F
1.
Assemble the gas piston
C
to the front and the
rear attachment.
2.
Attach the gas piston to the safety pin on the rear
attachment
F
.
3.
Fixate the gas piston with the safety shackle
D
.
4.
Fixate the gas piston in the front with the pin and
locking washer
E
.
Assembling
wire
for
gas
piston
- Azalea, Dahlia
A
B
C
1.
Place the wire
A
as shown on the picture.
2.
Make sure that the wire is fully stretched,
straight backwards.
3.
Place the wire in the attachment.
There should not be any distance between
the wire end
C
and the front part of the
attachment.
4.
Attach the wire to the chassis with an attachment
clip.
5.
Fixate the wire with the nuts
B
.
Both nuts should be touching the wire
attachment.
6.
Tighten the nuts.
10 mm fixed spanner
Note
This
instruction
is
an
extract
from
the
service
manual.
It
is
available
in
multiple
languages
and
can
be
downloaded
from
the
Invacare
website.
Please
contact
the
Invacare
representative
in
your
country.
Mounting
instruction
Rea
®
Azalea,
Dahlia
Gas
piston
kit
