REA® ASSIST
16
4.
A
1.
A
2.
B
4.
For shaping the form, loose the Velcro straps,
tighten fi rst where you would like to have a fi rm
support and follow with the others. Check that
the cover/cushion do not "lock" the straps by the
Velco attachment.
Please ensure that the velcro straps are not too
loose, as this will result in your back coming
into contact with backrest bow (A), and could
result in injury.
Backrest cushions
The three backrest cushions support waist,shoulders
or latheral , and all of them fi ts on the backrest plate
and the tension adjustable back.
Note that they should as well as the covers for ten-
sion adjustable back cover the upper part of the
backrest tube.
ARMRESTS
1. Armrest height
Adjust the height of the armrests by turning the
allen screw (A), setting the required height and
then re-tightening the knob.
2. Armrest depth
You can also adjust the depth of the armrest pad.
Loosen the knob (B), set the pad in the required
position and re-tighten the knob.
Summary of Contents for Rea Assist
Page 1: ...Rea Assist Manual English...
