background image

Setting Armrest Height 

 

Your chair is supplied with swing back height adjust armrests, as standard. 
1. To release the swing back arms, depress the clip on armrest frame found at the front of 

the armrest at the base on the outside, once depressed the arm can be swung back and 
out of position to aid transferring. 

2. To adjust the height of the armrest pad, locate the finger toggle half way down the 

armrest stem, turn anti clockwise then adjust height, lock in toggle. (Please note: 
secure toggle with a pair of pliers for a tight fit). 

 

                                                     

 

Fitting The Legrests 

 

The leg rests should be fitted from the side using the leg rest locating lugs, these are 
located at the front on each side of the Powerchair. 
The leg rests should then be able to be swung into a forward position where they will be 
located by the spring loaded lever, this will lock them into place. 

  

(Footplates pointing to 

the inside of the chair). 
 

                                                      

 

Adjustment of Footrest Height 

 

This is adjusted by loosening the bolt at the bottom of the footrest, tap upwards on the 
head of the bolt to release the internal wedge, adjust to the correct height and retighten 
the bolt. 

 

 

7

 

Summary of Contents for PT2000































Reviews: