Invacare Propad Revolve SI, User Manual

Page: 4 / 20

Invacare® Propad®
After Use
Storage
IMPORTANT!
– Store cushions in a dry environment.
– Store cushions within a protective cover.
– Store items on clean, dry surface free from
sharp edges to avoid any possible damage.
– Never store other items on top of a cushion.
– Do not store cushions next to radiators or other
heating devices.
– Protect cushions from direct sunlight.
1. Refer to the storage and shipping conditions in section
Environmental Parameters, page 4 .
Re-use
The product is suitable for repeated use. The number of
times it can be used depends on how often and in which
way the product is used.
1. Before reuse, clean the product thoroughly, see section
Cleaning and care, page 3 .
Disposal
The disposal and recycling of used devices and packaging
must comply with the applicable local legal regulations.
1. Ensure that the cushion is cleaned prior to disposal to
avoid any risk of contamination.
Technical Data
General data
Product Total
Height
[mm] Total Width
[mm] Total Depth
[mm] Nominal
density range
[kg/m
2 ]
Nominal
hardness range
[N] Minimum /
maximum
user weight
[kg]
2)
Weight of
product [kg]
1)
Propad®
Revolve
V
75 355 - 610 355 - 508 HR Foam: 70 160 – 200 40 / 190 1.25
Propad®
Revolve Si
75
355 - 610 355 - 508 70 160 – 200 40 / 190 2.5
1) Weights can vary depending on size of cushion ordered, average weights used as an indication.
2) Maximum user weight limits are set provided that the cushion selected is of appropriate width and depth for the intended
user(s). The maximum user weight limit applies to a 610 mm x 508 mm cushions.
Local requirements / certification available upon request from Invacare®.
Materials
Foam
Polyurethane foam components Inner liner Polyurethane ether film
Cover Polyurethane Fluid Silicone
Fluid sac Polyether based thermoplastic polyurethane film
All cushion components are Latex-Free.
Environmental Parameters
Operating conditions Storage and shipping conditions
Ambient temperature 10 - 35 °C -40 - 70 °C
Relative humidity 30% - 75% Non-Condensing 10% - 100%
Atmospheric pressure 70 - 106 kPa 50 - 106 kPa
4 1590567-C