Invacare Pro Tennis Top End, User Manual

Page: 59 / 76

Service
6.5 Replacing Adjustable Tension Seat
Upholstery
WARNING!
RISK OF INJURY OR DAMAGE
–
The seat upholstery and/or cushion MUST be cleaned
regularly and/or replaced if incontinence is frequent.
The risk of pressure sores is significantly higher with
seat upholstery that is wet and/or soiled.
1. Remove the seat cushion and back upholstery.
2. Place the wheelchair onto its two rear wheels and back posts.
3. Unlatch the five adjusting straps A that secure the seat
upholstery
B
to the wheelchair frame
C
.
4. Remove the existing seat upholstery.
5. Place the wheelchair back onto all four wheels.
Right and left is determined by sitting in the wheelchair.
The seat upholstery
B
MUST be positioned with the
five rear adjusting straps A towards the rear of the top
crossbar
D
for proper installation.
Make sure the rear retaining flap is between the
wheelchair frame and the back support brackets
(adjustable backs only).
6. Position new seat upholstery onto the wheelchair frame
C
,
ensuring the five adjusting straps A hang over the right and left
sides of the wheelchair.
7. Pull the front adjuster straps
A
around and under the wheelchair
frame top bars C .
8. Slip front adjuster strap
A
through corresponding anchor loop
E and adjust the seat upholstery B to desired tension. Secure
the adjustment straps
A
.
9. Place the wheelchair onto its two rear wheels and back post.
10. Securely latch the four remaining adjuster straps A together.
11. Return wheelchair to upright position.
12. Reinstall the seat cushion and back upholstery.
1171910-A~15 59