SECTION 7—COMPRESSOR
37
FIGURE 7.2
Replacing Compressor Assembly - 9 Liter Models
Replacing Capacitor
1. Turn power Off (O) and unplug the unit.
2. Remove the cabinet. Refer to Removing Cabinet on page 25.
3. Remove protective boot to reveal capacitor wires.
4. Disconnect the spade connectors from the capacitor terminals (not shown).
5. Remove the screw that secures the capacitor clamp to the soundbox brace.
6. Remove the capacitor from the concentrator base assembly.
7. Install new capacitor by reversing STEPS 3-6.
8. Run unit and inspect for leaks. Refer to Leak Test on page 71.
9. If no leaks detected, turn power Off (O) and unplug the unit.
10. Reinstall cabinet. Refer to Removing Cabinet on page 25.
FIGURE 7.3
Mounting
Screws
Intake
Hose
Compressor
Restraint Bracket
Compressor
Output Hose
Capacitor
Protective Boot
Clamp
Motor/Main
Harness
Connection
Capacitor
Screw
Soundbox Brace
Protective Boot
Capacitor Clamp
