4 OPERATION
Part No 1148136
17
Invacare® MA50 Series
Installing the Power Unit
1.
Swing out the bed hooks on the back of the control unit.
2.
Place the control unit on the footboard.
FIGURE
3
Installing the Power Unit
4.3
Connecting the Hose
1.
Locate the hose at the foot end of the mattress.
2.
Locate the control unit connectors on the right side of the control unit.
3.
Squeeze and hold the tabs on the hose connectors.
4.
Push the hose connectors onto the control connectors until an audible click is heard.
Refer to the instructions provided with the side
rails for the installation procedure.
If the bed does not have a footboard, place the
control unit on a flat surface, leaving room for the
hose to hang down.
Bed Hooks
CAUTION
Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked,
squeezed or otherwise damaged.
For this procedure, refer to FIGURE
4 on page 18.
The audible click indicates that the hose connectors are properly engaged with the control connectors.
