Invacare
®
Meteor
Service Manual
52
7.10.2 Reassembly
1.
Place the drive unit on the chassis.
2.
Place the axle mounting bracket on the drive unit.
3.
Screw the axle mounting bracket to the chassis
using the Allen screws, washers and nuts.
4.
Plug the drive cable plugs back in in the positions
you noted previously.
7.10.3
Replacing carbon brushes
1.
Dismantle the rear panelling (see section 7.3.3).
2.
Unscrew the four plastic slotted screws out of the
drive unit.
3.
Replace the carbon brushes located behind the
plastic slotted screws.
4.
Reassembly takes place in reverse order to disas-
sembly.
